Taskserver Setup

This guide leads you through all the necessary steps to setup your own Taskserver to sync your Taskwarrior-tasks.

Please follow the steps carefully and note all things you do differently.


Backup Your Data

Let's reinforce a good habit and make a backup copy of your data first. Here is a very easy way to backup your data:

          $ cd ~/.task
          $ tar czf task-backup-$(date +'%Y%m%d').tar.gz *

Now move that file to somewhere safe. All software contains bugs, so make regular backups.


This is not only due to a good habit, we will modify your data, so a backup is highly recommended.

Choose A Machine

A suitable machine to run your Taskserver is one that is always available. If you have such a machine, or have access to a hosted machine, that is ideal.

If your machine is not continuously available, it can still be a suitable Taskserver because the sync mechanism doesn't require continuous access. When a client cannot sync, it simply accumulates local, unpropagated changes until it can sync.

A laptop is a poor choice for a Taskserver host.

Choose A Port

By default, Taskserver uses port 53589. You can choose any port you wish, provided it is unused. If you choose a port number that is under 1024, then Taskserver must run as root, which is not recommended.

User & Group

Ideally you will create a new user and group solely to run the Taskserver. This helps you keep the data secure from other users on the machine, as well as controlling the privileges of Taskserver.


Depending on what devices you use to access your server, you may need to configure the firewall to allow incoming TCP/IP traffic on your chosen port.


Installation from a package

Installing Taskserver from a binary package is the simplest option, but you will need to refer to your package manager's documentation and procedures for doing this.

Take a look at the Download page for examples. Generally there are too many package managers to make a complete list with instructions here.


Before building the software, you will need to satisfy the dependencies by installing the following:

  • GnuTLS (ideally version 3.2 or newer)
  • libuuid
  • CMake (2.8 or newer, check with)
  • make
  • A C++ Compiler (GCC 4.7 or Clang 3.0 or newer)


Note that some OSes (Darwin, FreeBSD ...) include libuuid functionality in libc, check the following slides for more detailed instructions.

You don't necessarily need the latest version of all components, but it is a good idea if you can. GnuTLS is a security component, and as such, it is very important that it is current.


Using GnuTLS version 2.12.x is neither adequately secure, nor production quality. Please check the slide describing the GnuTLS-Problems for details.

Operating Systems

We have detailed instructions for the following operating operating systems on the following slides:

  • CentOS
  • Debian
  • Fedora
  • openSUSE
  • Ubuntu
  • MacOS

Windows & others

A note on other operating systems:

  • Windows with Cygwin (unsupported but working)
  • Recommendation: Use the Ubuntu subsystem in Windows 10 and follow the Ubuntu instructions.

In case you can add your operating system of choice, please send an email to support@taskwarrior.org (Thank you!).


Install dependencies:

        $ sudo yum install gcc-c++
        $ sudo yum install gnutls-devel
        $ sudo yum install libuuid-devel
        $ sudo yum install cmake
        $ sudo yum install gnutls-bin


Install dependencies:

        $ sudo apt install g++
        $ sudo apt install libgnutls28-dev
        $ sudo apt install uuid-dev
        $ sudo apt install cmake
        $ sudo apt install gnutls-bin


Install dependencies:

        $ sudo dnf install gcc-c++
        $ sudo dnf install gnutls-devel
        $ sudo dnf install libuuid-devel
        $ sudo dnf install cmake
        $ sudo dnf install gnutls-utils


Install dependencies:

        $ sudo zypper install gcc-c++
        $ sudo zypper install libgnutls-devel
        $ sudo zypper install libuuid-devel
        $ sudo zypper install cmake
        $ sudo zypper install gnutls-utils


Install dependencies:

        $ sudo apt install g++
        $ sudo apt install libgnutls28-dev
        $ sudo apt install uuid-dev
        $ sudo apt install cmake
        $ sudo apt install gnutls-utils


Install Xcode from Apple, via the AppStore, launch it, and select from some menu that you want the command line tools.

We expect you to have Homebrew installed on your Mac.

        $ brew install cmake
        $ brew install git
        $ brew install gnutls


Start the Cygwin GUI and install the following packages and their dependencies.

  • GnuTLS
  • libuuid
  • CMake
  • make
  • gcc-c++
  • gnutls-utils

Installation from a tarball

Installing Taskserver from a tarball is a matter of downloading the tarball, extracting it, satisfying dependencies and building the server.


The next step is to obtain the code. This means getting the Task Server 1.1.0 (or newer) source tarball. You should check for the latest stable release here:


You can download the tarball with curl, as an example of just one of many ways to download the tarball.

          $ curl -LO https://taskwarrior.org/download/taskd-latest.tar.gz


Expand the tarball, and build the Taskserver.

          $ tar xzf taskd-latest.tar.gz
          $ cd taskd-latest
          $ cmake -DCMAKE_BUILD_TYPE=release .
          $ make

We will refer to the directory where you extracted the data to as SOURCEDIR (in the example above it is taskd-latest).

Build Again

If you ever want to build the software again, do some cleanup.

          $ cd taskd-latest
          $ make clean
          $ rm CMakeCache.txt

make install

Now install Taskserver. This copies files into the right place, and installs man pages.

          $ sudo make install

Verify installation

Run the taskd command to verify that the server is installed, and the location is in your $PATH.

You should see something like this:

          $ taskd

          Usage: taskd -v|--version

Installation from Git-Repository

Installing Taskserver from git is a matter of cloning the git repository and building the server.

The same dependencies as for installation from tarball apply. Please check the corresponding slides.

Cloning the repository

Now clone the repository like this:

          $ git clone --recurse-submodules=yes \
                https://github.com/GothenburgBitFactory/taskserver.git \

Use stable!

It is highly recommended that you build the stable version. This involves simply executing the next command.

          $ cd taskserver.git

          $ git checkout master

Only under special circumstances you should build the unstable development version.

Special circumstances

The unstable development version is at no point guaranteed to work or even compile. The only time it does stabilize is right at the end of the development cycle, and in that case, you should wait until the release.

The stable version is always merged to the master branch, which is the default branch, so ordinarily nothing needs to be done. To build an unstable branch, first determine which branch by looking at the available branches:

Choosing the right branch

          $ cd taskserver.git
          $ git branch -a
          * master
          remotes/origin/HEAD -> origin/master

The convention we use is that master represents the stable release. The numbered branches represent the latest development (1.2.0, the 'highest' branch number, ending in '.0') and a patch branch (1.1.1, ending in a non-zero number).

Development version

Patch branches are reserved for emergency releases, so in this example you would choose to build 1.2.0 as the latest development branch like this (please not that starting with version 1.2.0 we make use of submodules).

          $ git checkout 1.2.0
          Branch 1.2.0 set up to track remote branch 1.2.0 from origin.
          Switched to a new branch '1.2.0'


          $ git submodule init
          Submodule 'src/libshared' (https://git.tasktools.org/scm/tm/libshared.git) registered for path 'src/libshared'

          $ git submodule update
          Cloning into 'src/libshared'...
          remote: Counting objects: 2180, done.
          remote: Compressing objects: 100% (1379/1379), done.
          remote: Total 2180 (delta 1641), reused 1018 (delta 796)
          Receiving objects: 100% (2180/2180), 369.13 KiB | 554.00 KiB/s, done.
          Resolving deltas: 100% (1641/1641), done.
          Checking connectivity...
          Submodule path 'src/libshared': checked out '2b0b70d90acb9a3ff3548befab9db8beb85a0c2d'

Build from Git

Now build the Taskserver.

          $ cd taskserver.git
          $ cmake -DCMAKE_BUILD_TYPE=release .
          $ make

In this case the SOURCEDIR is taskserver.git.

Test your build

Having built the server, now build and run the unit tests. Although this is an optional step, it is a good idea to know whether the build works on your platform.

          $ cd test # from SOURCEDIR
          $ make
          $ ./run_all

          Pass: 2920
          Fail: 0
          Skipped: 0
          Runtime: 1 seconds

          $ cd ..

Interprete the results

This example shows that all 2,920 tests pass. If you see test failures, stop and report them.

Note that there are some unit tests that fail if you have not built the latest commit. Seeing 4 test failures may mean all is well. Seeing 30 failures does not.

make install

Now install Taskserver. This copies files into the right place, and installs man pages.

          $ sudo make install

Verify your Installation

Run the taskd command to verify that the server is installed, and the location is in your $PATH. You should see something like this:

          $ taskd

          Usage: taskd -v|--version

Server Setup


We assume that you will do all configuration with the taskd user you chose to run the server with.

Data Location

Configuring the server is straightforward, but needs a little planning.

A location for the data must be chosen and created. The TASKDDATA environment variable will be used to indicate that location to all the taskd commands.

          $ export TASKDDATA=/var/taskd
          $ sudo mkdir -p $TASKDDATA

If the TASKDDATA variable is not set, then most taskd commands require the --data ... argument.


Everything the server does will be confined to that directory.

There are two 'D's in TASKDDATA, and omitting one is a common mistake.

The user that will run the server must have write permissions in that directory.


Now we let the server initialize that directory:

          $ taskd init
          You must specify the 'server' variable, for example:
          taskd config server localhost:53589

          Created /var/taskd

It is a good idea to copy the pki subdirectory from your SOURCEDIR to your TASKDDATA directory.

If you installed from a package (manager) search for the pki directory, find / -name pki -type d (example /usr/share/taskd/pki/ for Ubuntu).

Keys & Certificates

Now we create certificates and keys. The command below will generate all the certs and keys for the server, but this uses self-signed certificates, and this is not recommended for production use. This is for personal use, and this may be acceptable for you, but if not, you will need to purchase a proper certificate and key, backed by a certificate authority.


The scripts make assumptions that are guaranteed to be wrong for you. Specifically the generate.server script has a hard-coded CN entry that is not going to work. You need to edit the vars file, which you find in the pki subdirectory in your SOURCEDIR.


You will need to modify this value to match your server.

Most probably the result of hostname -f is exactly what you need ("yourserver.example.com").

Common Name

The value of CN (Common Name) is important.

It is this value against which Taskwarrior validates the servername, so use a value similar to ack.example.com, don't expect that example to work for you. If you do not change this value, the only option for the client is to skip some or all certificate validation, which is a bad idea.

Go to your SOURCEDIR, which depends on which installation method you chose.

Copy the certificates

Here is is assumed that you installed from the source tarball.

          $ cd ~/taskd-1.1.0/pki
          $ ./generate

          $ cp client.cert.pem $TASKDDATA
          $ cp client.key.pem $TASKDDATA
          $ cp server.cert.pem $TASKDDATA
          $ cp server.key.pem $TASKDDATA
          $ cp server.crl.pem $TASKDDATA
          $ cp ca.cert.pem $TASKDDATA

Configure taskserver

          $ taskd config --force client.cert $TASKDDATA/client.cert.pem
          $ taskd config --force client.key $TASKDDATA/client.key.pem
          $ taskd config --force server.cert $TASKDDATA/server.cert.pem
          $ taskd config --force server.key $TASKDDATA/server.key.pem
          $ taskd config --force server.crl $TASKDDATA/server.crl.pem
          $ taskd config --force ca.cert $TASKDDATA/ca.cert.pem


There are three classes of key/cert here. There is the CA (Certificate Authority) cert, which has cert signing capabilities and is used to sign and verify the other certs.

There are the server key/certs, which are used to authenticate the server and encrypt.

Finally there are client key/certs, which are not what you might expect. These are for API access, and not for your Taskwarrior client. Those are created later.

Other Configuration

Now we configure some basic details for the server. The chosen port is 53589. Note that we allow Taskwarrior clients specifically.

          $ cd $TASKDDATA/..
          $ taskd config --force log $PWD/taskd.log
          $ taskd config --force pid.file $PWD/taskd.pid
          $ taskd config --force server localhost:53589


Note that we have chosen localhost:53589, but this choice has consequences. The name localhost is not network visible, which limits the server to only serving clients on the same machine. Use your full machine name for proper network addressability.

You can look at all the configuration settings:

          $ taskd config

You can view all the supported settings with:

          $ man taskdrc

Control Server

You can now to launch the server:

          $ taskdctl start # analogue stop to stop the server

This command launched the server as a daemon process. This command requires the TASKDDATA variable. Your server is now running, and ready for syncing.

Check that your server is running by looking in the taskd.log file, or running this:

          $ ps -leaf | grep taskd

Interactive or Non-Daemon Server

A daemon server is typically how you would want to run Taskserver, but there may be times when you need to run the server attached to a terminal. These two commands are identical:

          $ taskdctl start
          $ taskd server --data $TASKDDATA --daemon

By omitting the --daemon option, the server remains attached to the terminal. Then to stop the server you can enter Ctrl-C.

Interactive Server

The interactive mode is really only useful for debugging, in conjunction with TLS debug mode, like this:

          $ taskd config debug.tls 3
          $ taskd server --data $TASKDDATA

With a debug.tls setting that is non-zero, you see lots of security-related diagnostic output.

systemd unit file

You can start Taskserver using a systemd-unitfile (called taskd.service) like the one on the next slide (please add the contents of $TASKDDATA not the variable itself). Running the Taskserver as root is not recommended, please add an appropriate user and group to run the daemon with ($TASKDUSER and $TASKDGROUP).


          Description=Secure server providing multi-user, multi-client access to Taskwarrior data

          ExecStart=/usr/local/bin/taskd server --data $TASKDDATA
          InaccessibleDirectories=/home /root /boot /opt /mnt /media
          ReadOnlyDirectories=/etc /usr


Control with systemd

Afterwards prepare systemd to recognise the file. The following commands need to be run as root-user.

          $ cp taskd.service /etc/systemd/system
          $ systemctl daemon-reload
          $ systemctl start taskd.service
          $ systemctl status taskd.service

In case everything is running fine, enable the script to start Taskserver on every boot.

          $ systemctl enable taskd.service

Client Setup

Add Organization

A user account must be created, along with a key, cert and ID, before syncing may occur.

Before creating a user account, you may need to create an organization. An organization consists of a group of zero or more users. You can get away with just one organization, and in this example, we will create just one, named 'Public'.

Create Organisation

You can create as many organizations as you wish (even one per user), and the purpose is simply to group users together. Future features will utilize this.

          $ taskd add org Public
          Created organization 'Public'

Now the organization 'Public' exists, we can add users to that organization.

Create User

Now we add a new user, named 'First Last' as an example. You can use any name you wish, and if it contains spaces, quote the name as shown.

          $ taskd add user 'Public' 'First Last'
          New user key: cf31f287-ee9e-43a8-843e-e8bbd5de4294
          Created user 'First Last' for organization 'Public'

Note that you will get a different 'New user key' than is shown here, and you will need to retain it, to be used later for client configuration. Note that the key is just a unique id, because your name alone is not necessarily unique.

Create Certificate and Key

Go to your SOURCEDIR, which depends on which installation method you chose. Here it is assumed that you installed from the source tarball.

          $ cd ~/taskd-1.1.0/pki
          $ ./generate.client first_last

This will generate a new key and cert, named first_last.cert.pem and first_last.key.pem. It is not important that 'first\_last' was used here, just that it is something unique, and valid for use in a file name. It has no bearing on security.

Let's encrypt

Certificates coming from Let's encrypt have not been successfully used by anyone.

Please remember that Let's encrypt only generates servers, but we need a client certificate as well.

A working scenario would be highly appreciated.

Taskwarrior Configuration

You have now created a new user account on the server, created a new client cert and key, and have details that need to be transferred to the user, to set up a sync client.

Information needed

  • ca.cert.pem is the certificate authority, and the only way to validate self-signed certs like ours.
  • first_last.cert.pem is the client certificate.
  • first_last.key.pem is the client key.
  • The new user key (yours will be different): cf31f287-ee9e-43a8-843e-e8bbd5de4294
  • The organization, Public.
  • The full and proper user name, First Last.

Server address and port

The server address and port, host.domain:53589 is needed as well.

In the server configuration we used localhost as an example. With localhost your server can not be reached from outside the machine your are running it on.

Whatever you actually used there, should be used here.


If you have configured Taskserver and created a user account (or better yet, someone created an account for you) then you now have details needed in the configuration of your Taskwarrior client.

Now we feed this information to Taskwarrior.

Copy all of them

Copy the Cert, Key and CA to your ~/.task directory. The reason we are copying the CA cert is because this is a self-signed cert, and we need the CA to validate against. Alternately we could force Taskwarrior to trust all certs, but that is not recommended.

          $ cp first_last.cert.pem ~/.task
          $ cp first_last.key.pem ~/.task
          $ cp ca.cert.pem ~/.task

Configure Taskwarrior to use them

Now we need to make Taskwarrior aware of these certs:

          $ task config taskd.certificate -- ~/.task/first_last.cert.pem
          $ task config taskd.key -- ~/.task/first_last.key.pem
          $ task config taskd.ca -- ~/.task/ca.cert.pem

Configure Taskserver in Taskwarrior

Now set the server info:

          $ task config taskd.server -- host.domain:53589

Finally we provide the credentials, which combine the organization, account name and user key:

          $ task config taskd.credentials -- Public/First Last/cf31f287-ee9e-43a8-843e-e8bbd5de4294

Your Taskwarrior is now ready to sync.

Trust Level

It is possible to configure Taskwarrior's trust level, which determines how the server certificate is treated.

You could specify taskd.trust=ignore hostname to skip certificate hostname validation. This is a bad idea. You can also specify taskd.trust=allow all to perform no validation. This is a worse idea.

The default value is taskd.trust=strict which performs the most stringent verification, and is more secure.

Note on Taskwarrior 2.3.0

For Taskwarrior 2.3.0 you can specify taskd.trust=yes in order to skip certificate validation. This is a bad idea. The default is taskd.trust=no, which does not trust the server certificate, which is more secure.


First Time Sync

You will do this differently depending on whether this is the first sync per device, or one of the many subsequent syncs.

The first time you sync is special - the client sends all your tasks to the server. This is something you should only do once on only one device.

          $ task sync init
          Please confirm that you wish to upload all your pending tasks to the Task Server (yes/no) yes
          Syncing with host.domain:53589

          Sync successful.  2 changes uploaded.


You should get an indication that tasks were uploaded, in this case 2 of them.

Please note that older Taskwarrior versions - before 2.5.1 - only sync the pending tasks and not all tasks.

General Sync

After the first time sync, you switch and just use this command:

          $ task sync
          Syncing with host.domain:53589

          Sync successful.  No changes.


This will give you feedback about what happened. Please note that it is perfectly safe to run this command as often as you wish. Syncing is safe and does not consume great system resources.


Note that if your client is a mobile device, a sync command may consume some of your data usage. Act accordingly.

But it does require network connectivity, and if there is no connectivity you will be notified. It is not a problem if a sync fails because of this, because the next sync that works will catch up with all the changes, and do the right merging. Taskwarrior and Taskserver were designed to work together, and tolerate intermittent connectivity.

Sync Reminder

After you modify data locally, Taskwarrior will start notifying you that you need to sync, after commands, like this:

          $ task project:foo list
          No matches.
          There are local changes.  Sync required.

This is just a reminder to sync.


Respond with a sync, and the reminder goes away:

          $ task sync
          Syncing with <server>:<port>

          Sync successful.  1 changes uploaded.

If you do not respond with a sync, then local changes accumulate unseen by other clients. When you do eventually sync, the data will be properly propagated, so it is a question of whether you need current data on the server. It is perfectly fine to allow weeks to go by without a sync.

Getting Help

Troubleshooting Guide

Please note there is a troubleshooting guide as well.

You can find the recent version here.

Getting Help

As a last resort, ask for help. But please make sure you have carefully reviewed your setup, and gone through the checks above before asking. No one wants to lead you through the steps above to discover that you didn't.

We'll ask you to provide the diagnostics output for both Taskwarrior and Taskserver, then we're going to go through the steps above, because this is our checklist also.

Getting Help (1)

There are several ways of getting help:

  • We have an FAQ covering a lot of questions.
  • Email us at support@taskwarrior.org, then wait patiently for a volunteer to respond.
  • Join us IRC in the #taskwarrior channel on Freenode.net, and get a quick response from the community, where, as you have anticipated, we will walk you through the checklist above.

Getting Help (2)

There are several ways of getting help:

  • Even though Twitter is no means of support, you can get in touch with @taskwarrior.
  • We have a User Mailinglist which you can join anytime to discuss about Taskwarrior and techniques.
  • The Developer Mailinglist is focussing on a more technical oriented audience.